§ 30-202. Final plat; processing and submittal requirements.

(a)

Commercial/industrial subdivisions do not require preliminary plats. The final plat shall show all the information required of standard subdivision final plats, as defined in division 4 of this article, except as may be further outlined herein.

(b)

Where a developer proposes more than one zoning designation within the subdivision, the plat shall be segmented into the various zoning designations requested, the individual lots can then be platted according to section 30-206.

(c)

Where rezoning is required, or is proposed by an applicant, rezone applications shall precede consideration of the plat, or be considered at the same board meeting as the final plat.

(d)

Upon receipt by the director of a complete final plat submittal for a nonresidential subdivision, the director will process the plat consistent with the processing of standard subdivision final plats contained in these regulations.

(e)

The final plat submittal shall include all of the plats and documents required of standard final plats, as defined in division 4 of this article, except that:

(1)

A standard detailed drainage report shall be included with the submittal for the entirety of the property proposed for subdivision.

(2)

A draft department of real estate report is not required.

(3)

A site and area transportation impact report shall be included.

(f)

Fees for the review of nonresidential subdivision submittals with lots or lot plats shall be as defined in the adopted fee schedule.

( Ord. No. 2001-01 , § 3.15(A), 2-20-2001; Ord. No. 2001-09 , § 3.15(A), 11-5-2001; Ord. No. 2004-04 , § 3.15(A), 12-6-2004; Ord. No. 2007-11 , § 3.15(A), 12-3-2007; Ord. No. 2010-06 , § 3.10(A), 4-5-2010)